|
A HISTORY OF RELIABLE SERVICE Since 1957, the
Quicklag Miniature Circuit breaker has been locally assembled
and supplied into the Australian electrical industry. Due to the
early establishment of the Quicklag it is widely recognised as
setting the industry benchmarks for Miniature Circuit Breakers.
The Quicklag Miniature Circuit Breaker has continued to develop
into the product family it is today including the ELQ Earth
Leakage Circuit Breaker.
These products, and a comprehensive range of busbar chassis
to suit the Quicklag product family, are all manufactured by
Eaton Electric in Sydney. Quicklag |
|
 |
|
|
Quicklag Miniature Circuit Breakers are used in a variety of
circuit protection applications that range from main protection
for submain circuits and light and power circuits through to
various motor circuit scenarios.
The Quicklag Miniature Circuit Breaker is available in 1, 2,
3 and 4 pole construction in thermal-magnetic current ratings
from 8A to 100A, all of which are completely interchangable.
A non-automatic 80A and 100A version for circuit
disconnection, which has no overload protection, is also
available in any of the four pole width configurations.
|
Interrupting Capacity: |
 |
6kA at 440V ac/Sym/2, 3, 4 pole |
|
|
6kA at 250V ac/Sym/1 pole
|
|
Approvals and Tests: |
|
|
Approval No N10019 to AS3111 and AS2184, Lloyd’s
approved
|
|
Accessories |
|
|
Termination
Depending upon preferred method of termination, the following
options are available:
- T50Q tunnel terminals to suit 25mm2 (50A) cable
- T100Q tunnel terminals to suit 50mm2 (100A) cable
- QLUGKIT inboard terminal lug assembly to suit 35mm2
(100A)(These are standard on 63A, 80A and 100A breakers)
- QLUG16 crimp lug kit 16mm2 (kit of 10)
- QLUG35 crimp lug kit 35mm2 (kit of 10)
|
|
|
Shunt Trip
Shunt trips are factory fitted and come in the following voltage
ranges;
- 51-89V ac, 30-59V dc, 90-440V ac, 60-250V dc, 20-48V ac,
12-25V dc.
|
|
|
Alarm Switch
- The alarm switch consists of a single change-over contact
rated at 5A that activates only on a trip condition.
|
|
|
Locking Devices
- Three types of locking devices are available for Quicklag
Circuit Breakers. The LKDQ handle lockdog for single pole
breakers is not padlockable while the handle lock for either
single PLKQ1 or multipole PLKQ2 breakers both come complete with
a padlock.
|
|
|
Clip Tray
- The C36Q Standard Chassis is available in a 36 pole length
which can be cut to suit customer requirements. A sliding clip
assembly is also available for use when breakers must be mounted
either side of a horizontal busbar. This ensures the toggle
direction is always up for ON and down for OFF. The assembly
comes complete with clip and screw for 3, 6, 12 and 24 pole
sizes.
|
|
